Hi Doug, The eZ430-F2013 doesn't support MSP430F5xx devices, as shown in the table below from the MSP Debuggers User's Guide on page 4. Because of this, we can't guarantee proper operation, even though it may have worked at one time. For debugging, I'd recommend using the MSP-FET (which supports all programmable MSP430 devices), but another option would be to use the eZ-FET Lite (found on the MSP-EXP430F5529LP ) or eZ-FET (found on the MSP-EXP430FR6989 ) on-board emulators. These are successors to the eZ430 emulator. For more information about them, take a look at Section 5.8 in the MSP Debuggers User's Guide . Although these are on-board the LaunchPads, they can be used with off-board devices (see the specific LaunchPad's User's Guide instructions on how to do this). Regards, James MSP Customer Applications
↧