Is there a known problem with eUSCI_B0 on the MSP432P401R ? I have revisions B and C on Launchpad revisions 1.0 and 2.0 respectively. I tried using a 16-bit DAC on eUSCI_B in SPI mode, and there would only be a valid transmission for the first byte. I needed to send 3 bytes, and when using an oscilloscope, it showed that the data line was attempting to send the bits. However, the clock would only activate for the first byte. I switched from eUSCI_B0 to eUSCI_B1, and it started working. I am using CCS 6.1.3.
↧