Ryan, I am running at 2.7V however I just measured it and it is 2.67V. I don't mind increasing that so that it is definitely above 2.7V. I don't know why the logic signal is only around 2.4V. There isn't a load on that pin. I do have a 12MHz crystal between XIN and XOUT. It does look like I can run it as the source to LFXT1 which can source ACLK. I did use this configuration with 12MHz LFXT1 sourcing ACLK with a DIVA2 (divide by 4) and this does work. I will continue with this but still wondering why both the MSP I2C SDA glitch exists and why does it mess up the LDC1314 ? Either way, I have a path forward. Thanks for your help!
↧