Hello Till, I was unable to reproduce your issue with the steps you listed above. I loaded in a blinky example with the same password configuration as you @FF80. I followed your steps and could not read anything in step 4. If I add -p 0x1111 (your password) inline with your step four, I am able to read those memory contents. If I add in the -p command with the correct password (0x1111) inline with step four, I am able to read the memory contents as normal. BTW, when you just do the -p command with no other commands, the MSP430Flasher will not throw an error. -p needs to be used in conjunction with other commands in order to talk to locked devices. I would suggest making sure you have the latest version of MSP430Flasher and that your MSP-FET is updated.--- This can be done by connecting to an updated CCS install or via CCS Cloud at http://dev.ti.com
↧