Hi David, I apologize for the confusion. Yes, I'm suggesting to use the XDS110-ET as the bridge between your board and PC. This will be the easiest way to upload code to your board and offload data. For this access, all you need to do is replicate either one of the following connectors, as shown in the image below. Connection J8 is intended for any ARM debug probe and connection J102 is intended for the XDS110-ET. I'd recommend first selecting the debugger you plan on using. For more details on specific debuggers, please refer to section 2.3.3 and 2.3.4 of the launchpad user's guide . Let me know if you have any other questions or need more clarification. Thanks, Mitchell
↧