Hello David, Thanks for your help. I tried to update the BSL into three devices as same as your properties settings, but I could not update these devices. Device1 got the same verify error. This was programed the BSL_PARAMS in the flash-mailbox. Device2 and Device3 got the results as bellow. Exited from Debugger and executed the Factory Reset. Then connected the BSL of Device2 and 3 with BSL Scripter3_2 and get the following message. --------------------------------------------------------- BSL Scripter 3.2.0 PC software for BSL programming 2016-Nov-16 11:04:36 --------------------------------------------------------- Input file script is : D:/share/BSL_scripter/432BSL_LED/script_version.txt MODE P4xx UART 9600 COM40 [ERROR_MESSAGE]Initialization of BSL P432 failed! Exit the scripter! But Connected the BSL with BSL Scripter3_1 and get the following message. --------------------------------------------------------- BSL Scripter 3.1.0.0 PC software for BSL programming 2016-Nov-16 11:06:15 --------------------------------------------------------- Input file script is : D:/share/BSL_Scripter_Windows/432BSL_LED/script_P4xx_version.txt MODE P4xx UART 9600 COM40 RX_PASSWORD_32 pass256_wrong.txt Read Txt File : D:/share/BSL_Scripter_Windows/432BSL_LED/pass256_wrong.txt Password is incorrect. RX_PASSWORD_32 pass256_default.txt Read Txt File : D:/share/BSL_Scripter_Windows/432BSL_LED/pass256_default.txt Password is incorrect. TX_BSL_VERSION_32 BSL Version is : BSL_Vendor[0],CI[300],API[600],PI[302],Build_ID[800] Maybe, this BSL is not updated because showed message as ‘Password is incorrect’ and BSL Version isn’t changed. I’ve programed the BSL downloaded from TI Web CUSTOM-BSL432 . Is this the latest? Best regards, Kazuo Yamauchi
↧
