Hello David, I use only the XDS110-ET emulator on MSP-EXP432P401R Rev-B, my test board is MSP-TS432PZ100 . I got some new MSP432P401R Rev-C and executed the same examinations. 1 BSL Scripter 3.2.0 with MSP-FET I t didn’t work. --------------------------------------------------------- BSL Scripter 3.2.0 PC software for BSL programming 2016-Nov-21 10:15:48 --------------------------------------------------------- Input file script is : D:/share/BSL_scripter/432BSL_LED/script_version.txt MODE P4xx UART 9600 COM40 [ERROR_MESSAGE]Initialization of BSL P432 failed! Exit the scripter! 2 The bat, you posted, to update BSL * I use XDS110-ET on MSP-EXP432P401R Rev-B. I have no debug trouble and I can do Factory Reset with this emulator. ----------------------------------------------- MSP432P401R BSL Firmware Programmer Programing "C:\ti\tirex-content\msp\MSP432Ware_3_50_00_02\boot_loader\BSL0000.00 03.0007.0205.000A.txt" ...... DSLite version 6.2.1.1595 Configuring Debugger (may take a few minutes on first launch)... Initializing Register Database... Initializing: CS_DAP_0 Executing Startup Scripts: CS_DAP_0 Initializing: CORTEX_M4_0 Executing Startup Scripts: CORTEX_M4_0 Connecting... fatal: CS_DAP_0: Error connecting to the target: (Error -1170 @ 0x0) Unable to a ccess the DAP. Reset the device, and retry the operation. If error persists, con firm configuration, power-cycle the board, and/or try more reliable JTAG setting s (e.g. lower TCLK). (Emulation package 6.0.222.0) Failed: Operation was aborted ----------------------------------------------- 3 BSL update with CCSv6.2 * There are no messages of BSL segment erase! When I tested another program, a segment erase message appeared. I wonder ‘Allow BSL segment erase’ don’t work. Thanks for your help. Best Regards, Kazuo Yamauchi
↧