Part Number: MSP-EXP430FR5994 This is a simplification of my prior question. I took a working project example for the MSP430FR5994 and added the HAL for the Kentec QVGA display from the TIDM-3DGRAPHICS-QVGA _Software example at http://www.ti.com/tool/TIDM-3DGRAPHICS-QVGA : HAL_kitronix320x240x16_ssd2119_spi.h and HAL_kitronix320x240x16_ssd2119_spi.c I then added the following two lines to my main.c Kitronix320x240x16_SSD2119Init(); GrContextInit(&g_sContext, &g_sKitronix320x240x16_SSD2119); If I modify HAL_kitronix320x240x16_ssd2119_spi.h to use the config for the MSP430FR5969 , the display never lights up, but the Kitronix320x240x16_SSD2119Init() does return. However, if I modify the HAL to use the config for the MSP430F5529 , the display lights up, but Kitronix320x240x16_SSD2119Init() does not return. Can somebody please tell me how to modify HAL_kitronix320x240x16_ssd2119_spi.h() to work correctly with the MSP430FR5994 LaunchPad ( MSP-EXP430FR5994 )?
↧