yes sir, i understand everything what you have said. now there will not be any change in the specifications. if there is any changes i will do it myself. don't worry about it. so, now i will tell you about this new thing in the water meter there are two magnets (i will attach the picture and i marked 1 & 2 as magnet) which are close to each other. so magnet 1 is attached to the wheel inside the water meter and another one is fixed i.e. it will no rotate. now when the water flows from the meter the wheel will rotate and the magnet which is attached to the wheel is also rotate. and this rotation of the magnet 1 makes it come closer to magnet 2 i.e. it passes from near the magnet 2. so when it pass for the 1st time one pulse will generate and when it pass for 2ns time another pulse will generate. so earlier what i was saying that after 2 pulse the output will show, it is this. when the magnet 1 pass two time near to the magnet 2, the two pulse will generate and with the generation of two pulses the three output pulse will also generate. this is all about it. there is the picture attached to this, if you see everything will be clear. and if you have any questions like you don't understand the task, i will tell you. but for now this i have to do
↧