Hi MSP champs, I have a question about F67xx AUX. I tested AUX module, when AUX1OK flag does not set timing, AUX0OK flag will never set. Is this right behavior? My test code is here.(Please visit the site to view this file) AUX1LVLx :110, then = Approximately 3.00 V AUX0LVLx: 110, then = Approximately 3.00 V When AUX1OK flag is 1, AUX0OK flag can change 1 or 0. But, when AUX1OK flag is 0(AUXVCC1 is under 3.0V. But it is over 2.4V), AUX0OK flag will never set (1->0 is OK, but 0->1 is NG) And, how should it set this AUX0OK flag in this case? Regards, Shinji Ueda
↧