Forum Post: RE: Radio Module fails to transmit data when PMM module is enable...
Thanks f. m. for guidance and motivation.. I will try to localize the issue.. and will post the updates as soon as I debug the problem... Regards, Dhara
View ArticleForum Post: Error -1063 - Unable to upload code to MSP432
Hi, I was testing some code changes on my project that uses a MSP432 it was working properly, but suddenly I was unable to upload the code and I'm getting the following error: Error connecting to the...
View ArticleForum Post: RE: FFT time
Hello, When I compilate this program to calculate http://e2e.ti.com/cfs-file/__key/communityserver-discussions-components-files/166/transform_5F00_ex1_5F00_fft_5F00_fixed_5F00_q15.c FFT on MSP 430 ,I...
View ArticleForum Post: RE: (MSP430F5659) ADC12, REF and Accuracy
It would be good to have the inaccuracy quantified. TI have anything to add here?
View ArticleForum Post: RE: ACLK slows to a crawl during debug
I had tried this before but only touched the crystal and it didn't reproduce the issue only seemed to change the duty cycle. However I tried it this morning and touched between the ZIF socket and the...
View ArticleForum Post: RE: (MSP430F5659) ADC12, REF and Accuracy
So, from this I take it that one can use both VeREF- and VeREF+ to set an ADC sampling window, with VeREF- > 0 (ideally > 1.4V) and VeREF+ < AvCC?
View ArticleForum Post: RE: eeprom with cc430
Hi Dennis, I already work with SPI, and I tried to communicate with each 93lc46b but I can not find the right result : / www.microchip.com/.../93LC46B Bilel
View ArticleForum Post: RE: msp430x54xA_uscia0_spi_09 example in loopback?
Thanks DSPwork for following up and posting to the community. Regards, Chris
View ArticleForum Post: RE: Using PMAP to reroute C1OUT to P7.1 on MSP432P401R
Thank for update and followup Benjamin. Chris
View ArticleForum Post: MSP432 external voltage reference
Hi, I'm working on a design for measuring low voltage(+/- 50mV) with high accuracy. I'm using the MSP432 for its 14 bit ADC and I wanted to improve the accuracy by using a precision voltage reference....
View ArticleForum Post: RE: MSP432 + TI RTOS + BNO055: I2C communication hanging
TI already has a solution for MSP432 - BOOSTXL-SENSORS booster pack. It has such Bosch sensors: BMI160 (Accelerometer and Gyro using DSP), BMM150 (magnetometer), BME280 (humidity, temperature and...
View ArticleForum Post: RE: XMS432P401R REVC Version is trapped in...
Can you report what MSPWare version you now have so that we can compare? If you go to View > Resource explorer and select MSPWare , then scroll to the bottom and report what it says for Version....
View ArticleForum Post: CC2650
I am using the Launchpad-XL to develop a BLE sensor. Now I have custom hardware using a DIFFERENT CC2650 hardware footprint - 7x7 is on the Launchpad, while I have a 4x4 device... How do I properly...
View ArticleForum Post: Z-STACK-ENERGY - Medium or large data model?
We are running Z-Stack-Energy-1.1.0_2.6 on MSP430F5359 . This device has 66KB RAM. Unfortunately, the Z-Stack libraries are built using the EW430 Small data model, so we can directly access only the...
View ArticleForum Post: Duty cycle using interrupts
HI TI Experts, I am using following code to generate duty cycle for sending data through ez430-rf2500 product. My questions are as follows:- 1) I am using timer A for duty cycle in which I set TACCR0 =...
View ArticleForum Post: MSP430 Get CPU Core register value from C code
Hello! I have a problem with TI Compiller (4.3.3) and CCS6. I need to get and store in to varible Core Register value (for example R11). In GCC I usually use the code like this: volatile int * i __asm...
View ArticleForum Post: I2C and SPI combined on UCB0 generate a Conflict
Dear all, I have two modules connected on the demo board. One operates with I2C and the other operates with SPI. I have mapped the pins of the I2C to port 2 BIT4 and BIT5. The SPI module uses the...
View ArticleForum Post: RE: MSP432 external voltage reference
Hi David! Could you add a schematic of the circuitry around your reference input? I don't really understand your setup. Regardind the non-zero value of the ADC when the supply is off: Your power supply...
View ArticleForum Post: RE: F16x source code EZ430 FET?
Hi Mike, Is this what you need? http://www.ti.com/tool/mspds Regards, Charles O
View Article