Hi, i could see after 2 months or so the cc3200 not getting programmed via UART and also JTAG access in debug mode and see the following error in 3 boards Error connecting to the target: (Error -233 @ 0x0) The JTAG IR and DR scan-paths cannot circulate bits, they may be broken. An attempt to scan the JTAG scan-path has failed. The target's JTAG scan-path appears to be broken with a stuck-at-ones or stuck-at-zero fault. (Emulation package 6.0.407.3) any help will be really appreciated.
↧