Forum Post: RE: MSP430i2040 Sub Metering EVM not reporting energy consumption...
The GUI is getting all the required data (voltage / current / power etc). Anyway, I need the updated firmware which reports the energy consumption. Can you send me the new firmware which supports...
View ArticleForum Post: RE: How to get MSP432 to the lowest power state in LPM3.5
Dan, Attached is the ZIP file that contains the latest LPM3.5 code example which has been validated against Rev C silicon. The update examples will be on the web this week. Regards, William (Please...
View ArticleForum Post: RE: DLMS COSEM - MSP430 - TAG_DATE, TAG_TIME and TAG_DATETIME not...
Hi Alan, I apologize for the confusion, I understand the problem now. Perhaps the issue is that the range of month, day of month, and day of week (last three parameters for TAG_DATE which is equivalent...
View ArticleForum Post: MSP430F247 I2C Issue
Posting on behalf of our customer. I have run into an issue using the MSP430F247 UCB1 module in I2C mode. I am trying to interface to a TI LDC1314 via I2C and have hit a snag. Up until now I have had...
View ArticleForum Post: RE: MSP430i2040 Sub Metering EVM not reporting energy consumption...
Ram, I am not in possession of such firmware, as explained before the engineers working on this design are no longer at TI. Any available updates are already provided on the MSP430-ENERGY-LIBRARY...
View ArticleForum Post: RE: MSP430F247 I2C Issue
Update: I have slowed the SCL clock down to 50KHz and the ISR for the start condition being sent runs and exits before the glitch on SDA occurs. This rules out it having anything to do with the ISR. I...
View ArticleForum Post: RE: MSP430F5438A SSL/TLS Implementation
Hi Manoj, The linked E2E post addresses this issue. e2e.ti.com/.../156227 Regards, Charles O
View ArticleForum Post: RE: MSP430i2040 Sub Metering EVM not reporting energy consumption...
Hi Ryan, Can you provide me the source code of the meterology library so that I can add the energy consumption code myself ? I can't just abandon this in the middle after having invested so much time...
View ArticleForum Post: MSP430FR5869
Team, I used the MSP430FR5869 . I find ACCTEIFG was set in my code. I have checked the system clock, it did not exceed 8 MHz. I want to know there is any other condition can triger this bit besides the...
View ArticleForum Post: RE: MSP430i2040 Sub Metering EVM not reporting energy consumption...
Hi Ram, I understand your predicament and would definitely advise that this roadblock is much too small to consider project abandonment. The metrology library source code is all available for download...
View ArticleForum Post: RE: MSP430i2040 Sub Metering EVM not reporting energy consumption...
Hi Ryan, Are you sure the code is available in the energy library ? I am quoting Mars - "We intentionally remove the source code for the metrology as we do not want to distribute it freely on the web....
View ArticleForum Post: RE: MSP430i2040 Sub Metering EVM not reporting energy consumption...
Hi Ram, My mistake, I see that the i2040 support is not included in the online release of the metrology code. I will send you a private message. Regards, Ryan
View ArticleForum Post: RE: MSP432BSL source compilation error
Hi Leo, In order to build that BSL version you will have to use an older CCS version without the newer updates. I went thru the same exercise a few months ago, e2e.ti.com/.../428480 Anyway we need to...
View ArticleForum Post: RE: MSP430i2040 Sub Metering EVM not reporting energy consumption...
Thx. I just downloaded and noticed this myself. Ram
View ArticleForum Post: RE: MSP430F5438A SSL/TLS Implementation
Hi Charles, Thanks. What processor would you suggest, if we have to opt for linux. Is there any dev boards readily available with linux ported? Suggest us the ways to reduce the design & dev time....
View ArticleForum Post: RE: The MSP430F5659 with xt2 crystal osc 19.2 MHz write to flash...
So I don't understand why under internal 10 MHz clock or external (xt2) 12 MHz clock it works without any problem, my problem when it works with 19.2 MHz ? It's very stranger.
View ArticleForum Post: I can't reach 1MSPS with my MSP432, what am I doing wrong?
Hello dear e2e, I want to run my ADC in repeat single channel mode at 1MSPS. For the clock source I select MODCLK at 24MHz, with it I've had the best results. SYSCLK runs at 48MHz. I measure the speed...
View ArticleForum Post: RE: MSP430FR4133 Low power delay
>What is battery type & capacity? Do you know battery self-dischare current? 6-cell 12v 12ah SLA battery, however I am not having problems with anything regarding the battery, the problem lies...
View ArticleForum Post: RE: TIDM-BIOSIGNMONITOR reference design
Thanks Ryan, The BIOSIGNMONITOR was build, therefor project exist. By the schematics look it definitely was an ALTIUM project. I would greatly appreciate if you could get me this project. And it is...
View ArticleForum Post: RE: Loading Binary image to MSP430
Thanks Ryan. I've done these steps already. The first issue is that the resulting file that appear in the debug folder seems to be a TI-TXT file but has no .txt extension, and is named differently from...
View Article