Forum Post: RE: Cannot initialise an array in uVision with msp432!
Thanks Chester for trying it out. I will now try to reinstall uVision and try the same blinky project once again. It should work ok after that. Many thanks again.
View ArticleForum Post: SLAA503 for MSP430F5529 onto MSP43G2553
Hello All, Firstly, I apologise if this is in the wrong forum. A little unsure if this is an issue specific to CCS or the boards. CCS and the TI ecosystem is something that is new to me, so I am just...
View ArticleForum Post: RE: MSP432 COMP C1.0 input at Vcc
Hello Cameron thanks for the quick response, I typically use the forum as a help guide and typically I find many of my questions answered by others who previously had a problem. In this case I could...
View ArticleForum Post: RE: Equivalent components from Texas Instruments?
I am interested in your project and quite willing to help with no strings attached. I am not a TI employee but I have been participating in this MSP430 Forum for more then 10 years. Your TI contact...
View ArticleForum Post: RE: Timers and PWM - MSP430G2553
The PWM signals on P2.1 and P2.2 are exactly the same. I think you are going to burn your bridge.
View ArticleForum Post: MSP430 HID Datapipe detection delay in Android
I have an MSP430-based device operating with a HID Datapipe over USB. I'm connecting this device to an Android tablet running an app I wrote based on information from slaa630.pdf: Android Applications...
View ArticleForum Post: RE: MSP430F6726 ADC10 problem
Finally making some headway. I did as you suggested and created a bare-bones program. The ADC10 works on the newer IC. I'm now in the slow process of adding modules back to see what is effecting the...
View ArticleForum Post: RE: MSP430F6726 ADC10 problem
The problem is resolved. The solution: 1) Increasing Vcore from minimum to maximum voltage. 2) TLV returning ~ -1.0 for cal. The values I expect can never go negative and thus get clipped at 0, so for...
View ArticleForum Post: i2c with msp430g2553 to lcd
Hi Everybody, I have msp430g2553 with launchpad and i'm working with ccs enviroment I need to communicate with lcd with i2c bus protocol. I wanted to know: 1. is there an examples for msp430g2553 with...
View ArticleForum Post: MSP430FR5739 I2C repeated start issue
Hey everyone, for some reason when i send a repeated start i cant put it in reciever mode therefore setting the R/W bit high. After watching debug mode and trying to run to line (UCB0CTLW0 &=...
View ArticleForum Post: RE: ez430-f2013 - writing flash from a visual studios app.
The MSP430F2013 datasheet says: The flash memory can be programmed via the Spy-Bi-Wire/JTAG port, or in-system by the CPU. What driver are you using to program your actual application into the flash?
View ArticleForum Post: RE: SLAA503 for MSP430F5529 onto MSP43G2553
[quote user="Adam Croot"]Are these definitions specific to the MSP430F5529 this solution was developed for?[/quote]The definitions shown in your errors are related to peripherals which are different...
View ArticleForum Post: text file to msp flash
Hi, I have a text file with some data. How do I copy it into flash memory of MSP430? I am using g2553. Thnx
View ArticleForum Post: RE: ez430-f2013 - writing flash from a visual studios app.
I have successfully used Code Composer and the FET MSP430 Flash Programmer. both of these apps came with the ez430-f2013 USB stick.
View ArticleForum Post: RE: MSP430FR5739 I2C repeated start issue
According to figure 20-12 of the User's Guide, you should write TXBUF before waiting for UCTXSTT to clear. This code doesn't do anything after the repeated start. Don't you want to read something?
View ArticleForum Post: RE: SLAA503 for MSP430F5529 onto MSP43G2553
Hello Chester, Thank you very much for your reply. It was very helpful. It has given me a few starting places to look into. It seems that porting this directly might be more hassle than its worth right...
View ArticleForum Post: RE: MSP430 USBCDC_handleReceiveCompleted not working?
Hi Arthi, Thanks! between this and re-reading Chapter 11 of the developer's guide, I now have something that works.
View ArticleForum Post: RE: text file to msp flash
Is that "text file" in "msp430-txt" format specifically generated to be loaded into msp430g2553 ? If so, you may load that into your msp430g2553 . You will need either BSL or JTAG interface hardware...
View ArticleForum Post: RE: Timers and PWM - MSP430G2553
I haven't post a code so far. Port 2 is in use for a lcd so i only can only choose Port1 for PWM signal out. As i have tried to describe: i need to change the Bit on Port1 for motor rotaion change. If...
View ArticleForum Post: RE: text file to msp flash
No no. It is just some excel sheet with some data values and text. I need that data in the flash memory of MSP. How can I do that.
View Article